Mar 22, 2023 · Hi We have ordered some 9200Cx, but it seems that we need a micro USB to get to the console. Not the standard mini USB type B, but the mobile phone type USB Micro Type B. A standard USB Micro Type B, doesn't work, even with the Cisco USB Driver, not serial port appears under the Ports (Com & LPT) l...

Mar 28, 2023 · My new Lenovo P1 laptop with Windows 11 was not able to communicate via the blue Cisco USB console cable to my IR1101 router serial port. My previous Lenovo X1 laptop running Windows 10 worked fine with the same cable and the same router. Solution: I installed the latest Silicon Labs CP210x Universa...

Nov 4, 2019 · 2. First, disconnect the blue Cisco USB console cable. Reinstall the Cisco USB console drive using setup(x64).exe from the Windows_64 folder which was extracted from file Cisco_usbconsole_driver_3_1.zip. 3. Reboot PC. 4. Open device manager to observe the driver installation. Check that you see "Cisco USB to Serial Adapter".

Jul 30, 2018 · The documentation I find on the 9300 seems to skip over the initial IP configuration of a brand new switch. Is a console cable required, or is there some way to do it with a standard network patch cable (like the 2960X express setup). We typically direct ship new switches to branch locations and t...

Aug 28, 2016 · I saw that some people have this problem. I have no access to the console to my cisco 3560 switch. I can not access rommon mode too. I just have blank screen despite the fact that the serial configuration was done properly: Bits per second:9600. Data bits:8. Parity:None. Stop bits:1. flow control:None. I just checked the cable and it is ok.

Nov 15, 2013 · Hello. I try access to ap AIR-CAP2602E-E-K9 via console cable and it not works. I use the same cable and the same serial port settings as for 3750 switch and other cisco routers. There is nothing on monitor or sometimes i get some strange sign. I try to type sh version, sh inventory and sh ip inte...

Oct 11, 2020 · 2) HyperTerminal or similar soft able to upload files via Xmodem protocol. Should be installed on a machine that is connected to the device console port. 3) Appropriate console cable. Commands in ROMMON (!): switch: flash_init. switch: set BAUD 115200. Change your terminal speed to 115200 as well.

Feb 3, 2014 · Hello! I would like to know if there's some situation what a console port could be disabled, or something like that. I'm trying to configure a Catalyst 2960 Series PoE-24 by the console port using the hyperterminal, but it's not working. I verified the cable and the COM port, and everything works w...

Jul 30, 2024 · I found the Cisco_usbconsole_driver_3_1.zip. But after I installed it, in Device Manager, under Ports (COM, LPT), I do not see a Serial USB Port. Thank you so much.

Nov 11, 2016 · Hi, I have a Cisco SG300-10 and I want to be able to access the console using serial cable. The SG-300 has a serial DB9 Female for console input and require a null modem cable. I have try 2 different commercial null modem cable without success. I even build my own null cable using only pin 2,3,5 ...